Epson L6370 Printer Not Printing? Complete Fix Guide for Wi-Fi, Ink, Driver, and Blank Page Issues

.. Epson L6370 Stopped Printing? ✔ 1➜866((490))➜0338 ⚡ Here’s the Smart Way to Fix It

When your **Epson L6370 printer is not printing**, 👉 1-866-490-0338(USA/UK) ☎️ the problem can feel confusing because the printer may still look normal. The power light may be on, Wi-Fi may show connected, and the document may even appear in the print queue— ☎️(+1) ↪ 866 490 0338 ↪but no page comes out.

In many cases, the Epson L6370 does not print because of a stuck print job, wrong printer selection, weak Wi-Fi connection, offline mode, low ink, clogged nozzles, paper feed issue, or driver problem. The good news is that most of these issues can be fixed at home without opening the printer.

This guide gives you a clear step-by-step solution to fix **Epson L6370 not printing**, including blank pages, offline status, Wi-Fi printing failure, slow printing, and driver errors.




To fix an **Epson L6370 printer not printing**, restart the printer and computer, check ink and paper, clear the print queue, set Epson L6370 as the default printer, disable offline mode, reconnect Wi-Fi, update or reinstall the Epson printer driver, and run nozzle check plus printhead cleaning if it prints blank or faded pages.



.. Fast 2-Minute Epson L6370 Print Check

Before deep troubleshooting, try this quick reset path:

1. Turn off the Epson L6370.
2. Restart your computer.
3. Restart your Wi-Fi router.
4. Turn the printer back on.
5. Check paper and ink levels.
6. Cancel all pending print jobs.
7. Select Epson L6370 as your printer.
8. Print a test page.

If it still does not print, follow the detailed fixes below.



# Why Is My Epson L6370 Printer Not Printing? ✔ 1➜866((490))➜0338 ⚡

The Epson L6370 may stop printing because the printer, computer, network, or ink system is not communicating correctly. Sometimes the issue is simple, like an empty paper tray. Other times, the printer may need driver repair or printhead cleaning.

Common reasons include:

* Epson L6370 is offline
* Wrong printer is selected
* Print queue is stuck
* Printer is paused
* Wi-Fi signal is weak
* Computer and printer are on different networks
* Ink level is low
* Printhead nozzles are clogged
* Paper is not loaded correctly
* Epson driver is outdated
* Printer port is incorrect
* USB cable is faulty
* Firewall or VPN is blocking local printing
* Printer firmware or software needs updating

Start with connection and queue fixes first. Then move to ink, driver, and maintenance steps.



# How to Fix Epson L6370 Printer Not Printing

.. 1. Check Printer Power and Ready Status

First, make sure the printer is actually ready to print.

Look for:

* Power light is stable
* No paper jam warning
* No ink warning
* No error message
* Paper tray is loaded
* Printer is not in sleep mode
* Wi-Fi light is active if using wireless printing

If any light is blinking or the screen shows an error, fix that message before trying to print again.



.. 2. Restart the Printer Properly

A soft restart may clear temporary printer errors.

..# Steps:

1. Turn off the Epson L6370.
2. Unplug the power cable.
3. Wait for 60 seconds.
4. Plug it back in.
5. Turn on the printer.
6. Wait until it becomes ready.
7. Try printing again.

This refreshes the printer’s internal memory and connection state.



.. 3. Restart Your Computer and Router

If the printer receives no print command, your computer or network may be stuck.

..# What to do:

1. Restart your computer.
2. Restart your Wi-Fi router.
3. Wait until the internet comes back.
4. Make sure your computer reconnects to the correct Wi-Fi.
5. Try printing a small document.

This is especially helpful when the Epson L6370 is connected wirelessly but does not respond.



.. 4. Set Epson L6370 as the Default Printer

Your document may be going to another printer, PDF printer, or old printer entry.

..# On Windows 11:

1. Open **Settings**.
2. Go to **Bluetooth & devices**.
3. Click **Printers & scanners**.
4. Select **Epson L6370**.
5. Click **Set as default**.

If Windows says it manages the default printer automatically, turn off **Let Windows manage my default printer**.

..# On Windows 10:

1. Open **Settings**.
2. Go to **Devices**.
3. Select **Printers & scanners**.
4. Click **Epson L6370**.
5. Choose **Manage**.
6. Click **Set as default**.

Now print again from your document or browser.



.. 5. Clear the Epson L6370 Print Queue

A single stuck file can block every new print job.

..# Steps:

1. Go to **Settings**.
2. Open **Printers & scanners**.
3. Select **Epson L6370**.
4. Click **Open print queue**.
5. Cancel all pending documents.
6. Restart the printer.
7. Send a new test print.

If a job refuses to cancel, restart the computer and try clearing the queue again.



.. 6. Disable “Use Printer Offline” Mode

Windows may mark the printer offline even when it is connected.

..# Steps:

1. Open **Control Panel**.
2. Go to **Devices and Printers**.
3. Right-click **Epson L6370**.
4. Select **See what’s printing**.
5. Click **Printer** from the top menu.
6. Uncheck **Use Printer Offline**.
7. Uncheck **Pause Printing** if selected.

This often fixes the Epson L6370 not printing issue immediately.



.. 7. Check Paper Size and Paper Loading

The printer may refuse to print if the paper setting does not match the loaded paper.

..# Check these:

* Use clean, flat paper
* Do not overload the tray
* Adjust paper guides correctly
* Match paper size in print settings
* Remove curled or damp paper
* Check for small torn paper pieces

For testing, use plain A4 paper and standard print settings.



.. 8. Check Ink Levels

The Epson L6370 may print poorly or stop printing if ink is too low.

..# What to do:

1. Check all ink tanks visually.
2. Make sure ink is above the minimum level.
3. Refill with the correct ink type if needed.
4. Close tank caps firmly.
5. Wait a few minutes after refilling.
6. Try a test print.

Avoid printing when ink is below the minimum line. It may cause air gaps and print quality issues.



# Fix Epson L6370 Printing Blank Pages

If your Epson L6370 pulls paper but prints blank pages, the issue is usually related to ink flow, clogged nozzles, or printhead condition.

.. 9. Run a Nozzle Check

A nozzle check shows whether ink is flowing correctly.

..# Steps:

1. Open Epson printer utility on your computer.
2. Choose **Nozzle Check**.
3. Print the test pattern.
4. Look for missing lines or blank areas.

If the pattern has gaps, run printhead cleaning.



.. 10. Run Printhead Cleaning

Printhead cleaning helps clear blocked nozzles.

..# Steps:

1. Open the Epson maintenance utility.
2. Select **Head Cleaning**.
3. Wait for the process to finish.
4. Print another nozzle check.
5. Repeat only if needed.

Do not run cleaning too many times continuously. It uses ink. If needed, wait 10–15 minutes before repeating.



.. 11. Use Power Cleaning Only When Needed

If normal cleaning does not fix blank pages or missing colors, your printer may offer a stronger cleaning option.

..# Use it carefully:

* Make sure all ink tanks have enough ink
* Do not interrupt the process
* Follow on-screen instructions
* Use only after normal cleaning fails

Power cleaning consumes more ink than regular cleaning, so it should not be your first step.



# Fix Epson L6370 Wireless Printing Issues

.. 12. Make Sure Printer and Computer Are on the Same Wi-Fi

Wireless printing fails when the printer and computer are on different networks.

..# Check this:

* Both devices use the same Wi-Fi name
* Computer is not on guest Wi-Fi
* Printer is not connected to old router
* VPN is not blocking local devices
* Router is not too far from printer

If you recently changed your Wi-Fi password or router, reconnect the Epson L6370 to the new network.



.. 13. Reconnect Epson L6370 to Wi-Fi

If Wi-Fi printing stopped suddenly, reconnect the printer.

..# General steps:

1. Open the printer’s network or Wi-Fi settings.
2. Select Wi-Fi setup.
3. Choose your Wi-Fi network.
4. Enter the password carefully.
5. Wait for connection confirmation.
6. Add the printer again on your computer if needed.

After reconnecting, print a network status report if available.



.. 14. Add Epson L6370 by IP Address

If your computer cannot find the printer automatically, add it manually.

..# Windows steps:

1. Find the printer IP address from the network report or printer settings.
2. Open **Settings > Printers & scanners**.
3. Click **Add device**.
4. Choose **Add manually**.
5. Select **Add a printer using an IP address**.
6. Enter the printer IP address.
7. Choose the Epson driver.
8. Finish setup and print a test page.

This is useful when the Epson L6370 is connected but not detected.



.. 15. Turn Off VPN Temporarily

A VPN can block your computer from reaching local network printers.

..# Fix 〖 ☎️⭐+1-(866)-490-0338 〗:

1. Disconnect the VPN.
2. Try printing again.
3. If printing works, enable local network access in VPN settings.
4. Reconnect VPN after setup.

This issue is common on work laptops and privacy-focused VPN apps.



# Fix Epson L6370 Driver and Software Problems

.. 16. Update the Epson Printer Driver

An outdated driver can stop the Epson L6370 from printing correctly.

..# Steps:

1. Open **Device Manager**.
2. Expand **Printers** or **Print queues**.
3. Right-click **Epson L6370**.
4. Select **Update driver**.
5. Follow the prompts.
6. Restart your computer.

If Windows cannot find the correct driver, install it manually from Epson’s support source.



.. 17. Remove and Reinstall the Printer

A corrupted printer profile can cause repeated print failures.

..# Steps:

1. Open **Settings**.
2. Go to **Printers & scanners**.
3. Select **Epson L6370**.
4. Click **Remove**.
5. Restart your computer.
6. Add the printer again.
7. Install the correct driver if asked.
8. Print a test page.

This is one of the best fixes after Windows updates or network changes.



.. 18. Restart the Print Spooler

The print spooler manages print jobs in Windows. If it freezes, printing stops.

..# Steps:

1. Press **Windows + R**.
2. Type `services.msc`.
3. Press **Enter**.
4. Find **Print Spooler**.
5. Right-click it.
6. Select **Restart**.

Now clear the queue and try printing again.



# Common Epson L6370 Not Printing Problems and Fixes

.. Epson L6370 Connected but Not Printing

If the printer shows connected but does not print, check the queue and default printer setting first.

..# Fix 〖 ☎️⭐+1-(866)-490-0338 〗:

* Clear stuck jobs
* Set Epson L6370 as default
* Disable offline mode
* Restart Print Spooler
* Reinstall driver if needed



.. Epson L6370 Not Printing Black

This usually points to black ink level, clogged black nozzle, or print setting issue.

..# Fix 〖 ☎️⭐+1-(866)-490-0338 〗:

* Check black ink tank
* Run nozzle check
* Run head cleaning
* Print a test page
* Avoid draft settings during testing



.. Epson L6370 Not Printing Color

Missing colors often mean clogged color nozzles or low ink.

..# Fix 〖 ☎️⭐+1-(866)-490-0338 〗:

* Check cyan, magenta, and yellow ink
* Run nozzle check
* Run head cleaning
* Make sure color printing is selected
* Try a different document



.. Epson L6370 Not Printing After Wi-Fi Change

If you changed your router or Wi-Fi password, the printer may still be connected to old settings.

..# Fix 〖 ☎️⭐+1-(866)-490-0338 〗:

* Reset Wi-Fi settings on printer
* Connect to the new Wi-Fi
* Remove old printer entry
* Add Epson L6370 again
* Print a test page



.. Epson L6370 Not Printing from Laptop

The laptop may be on a different Wi-Fi network or using a wrong printer entry.

..# Fix 〖 ☎️⭐+1-(866)-490-0338 〗:

* Connect laptop and printer to same Wi-Fi
* Select Epson L6370 in the print window
* Disable VPN
* Add printer by IP address
* Update Epson driver



.. Epson L6370 Printing Slow

Slow printing is often caused by high-quality settings, weak Wi-Fi, or large files.

..# Fix 〖 ☎️⭐+1-(866)-490-0338 〗:

* Use standard print quality
* Move printer closer to router
* Print smaller files first
* Use USB for testing
* Restart router and printer



# Advanced Troubleshooting for Epson L6370

.. Check Printer Port Settings

A wrong port can stop Windows from sending jobs to the printer.

..# Steps:

1. Open **Control Panel**.
2. Go to **Devices and Printers**.
3. Right-click **Epson L6370**.
4. Choose **Printer properties**.
5. Click the **Ports** tab.
6. Select the correct port or IP address.
7. Apply changes.

If the IP address changed, create a new TCP/IP port.



.. Reset Network Settings on the Printer

Use this if the printer keeps disconnecting or is not found.

..# When to reset:

* New router installed
* Wi-Fi password changed
* Printer not detected
* Printer keeps going offline
* IP address conflict

After reset, reconnect the printer to Wi-Fi and add it again on your computer.



.. Check Firewall Permissions

Firewall rules may stop printer communication.

..# What to check:

* Set network type to private
* Allow Epson software through firewall
* Allow printer sharing if needed
* Avoid strict public network mode
* Test printing after adjusting settings

Do not leave firewall disabled permanently.



.. Test with USB Connection

USB testing helps confirm whether the issue is printer hardware or network setup.

..# Steps:

1. Connect Epson L6370 to the computer with USB.
2. Wait for detection.
3. Select Epson L6370 USB printer.
4. Print a test page.

If USB works, the main issue is likely Wi-Fi or network settings.



# Pro Tips to Prevent Epson L6370 Printing Issues

* Print at least once a week.
* Keep ink above the minimum line.
* Use the correct ink for the model.
* Do not overload the paper tray.
* Keep the printer near the router.
* Avoid guest Wi-Fi for printing.
* Update drivers after major Windows or Mac updates.
* Clear old print jobs regularly.
* Keep the printer on a stable surface.
* Run nozzle check before repeated cleaning.
* Use IP address setup for stable network printing.
* Restart router if wireless printing becomes unreliable.

These habits reduce clogged nozzles, offline errors, and failed print jobs.



# People Also Ask: Epson L6370 Printer Not Printing FAQs

.. Why is my Epson L6370 printer not printing? ✔ 1➜866((490))➜0338 ⚡

Your Epson L6370 printer may not print because it is offline, paused, connected to the wrong Wi-Fi, low on ink, blocked by a stuck print queue, using an outdated driver, or suffering from clogged printhead nozzles. Start by restarting devices, clearing the queue, and checking ink and Wi-Fi.



.. How do I fix Epson L6370 printing blank pages? ✔ 1➜866((490))➜0338 ⚡

To fix Epson L6370 printing blank pages, check all ink tanks, run a nozzle check, perform printhead cleaning, and print a test pattern. If blank pages continue after cleaning, let the printer rest and try again. Persistent blank pages may need service inspection.



.. Why is my Epson L6370 connected but not printing? ✔ 1➜866((490))➜0338 ⚡

If your Epson L6370 is connected but not printing, your computer may have a stuck print job, wrong default printer, offline mode enabled, incorrect port, or damaged driver. Clear the queue, set Epson L6370 as default, restart Print Spooler, and reinstall the driver if needed.



.. How do I get Epson L6370 back online? ✔ 1➜866((490))➜0338 ⚡

Open printer settings, select Epson L6370, clear pending jobs, disable **Use Printer Offline**, restart the printer and computer, and reconnect the printer to Wi-Fi. If it still shows offline, remove and re-add the printer using its current IP address.



.. Why is my Epson L6370 not printing after changing Wi-Fi? ✔ 1➜866((490))➜0338 ⚡

After changing Wi-Fi, your Epson L6370 may still be saved with the old network settings. Reconnect the printer to the new Wi-Fi, make sure your computer uses the same network, remove the old printer entry, and add the printer again.



.. How do I clean the printhead on Epson L6370? ✔ 1➜866((490))➜0338 ⚡

Open the Epson printer utility on your computer, choose **Nozzle Check**, review the printed pattern, then run **Head Cleaning** if lines are missing. After cleaning, print another nozzle check. Do not repeat cleaning too many times in a row because it uses ink.



.. Do I need to reinstall the Epson L6370 driver? ✔ 1➜866((490))➜0338 ⚡

Yes, reinstall the Epson L6370 driver if the printer stopped printing after a system update, shows driver unavailable, is not detected, prints incorrectly, or appears multiple times in printer settings. Remove the old printer entry, install the correct driver, and add it again.



# Final Takeaway

An **Epson L6370 printer not printing** problem is usually caused by a connection, queue, ink, printhead, driver, or Wi-Fi setup issue. Start with simple steps: restart the printer, check paper and ink, clear the print queue, set Epson L6370 as default, and disable offline mode.

If it prints blank pages, run nozzle check and head cleaning. If it is connected but still not printing, reinstall the driver or add the printer by IP address. With the right troubleshooting path, your Epson L6370 should start printing normally again.